Lathe chuck shields

"操作区的险有操作点的危险，夹伤点，旋转部件，飞溅物体和火花等等。为了保护在操作区的操作人员和其他人员，**使用一种或多种保护措施，比如栅栏，双手控制装置，电控安全装置 
本品为浇铸的铝质钻床保护罩，带有1.75”的标准内径。该内径可由客户自己扩大到较大3.5,保护罩有两层和三层的，可以保护行程从3”到6”的钻床。较下面一层保护罩具有透明的观察窗,安装在机器的轴套上。如果需要更换卡盘或者钻头的时候，防护罩可以旋转到上前方（图3.2）.也提供带有铰链，可以旋转到左边的保护罩 
符合ISO13849-1；ANSI CE标准移门方便打开，确保安全 
注意事项: 安全项目**由立宏**安全人员风险评估，安全回路设计等，相同设备安全设计由于加工方式，加工产品等均不相同（即每一设备为量身定做）Insurance operating area dangerous operation point, pinch points, rotating parts, flying objects and sparks and so on. In order to protect the operator and other personnel in the operating area, you must use one or more protective measures, such as fences, hand control device, electronically controlled safety device
This product is a cast aluminum drill shield, with 1.75 ""diameter standard The inner diameter of the largest by the customer's own expanded to 3.5, there are two-and three-tier protective cover can protect stroke from 3"" to 6 ""drilling . the bottom layer has a transparent protective cover observation window installed on the machine's sleeve if you need to replace the drill chuck or when the protective cover can be rotated to the front (Figure 3.2). provides with hinges, can the protective cover is rotated to the left
Compliance with ISO13849-1; ANSI CE standard sliding door easy to open, to ensure safety
Note: security projects must be done by a professional security personnel Lihong risk assessment, safety circuit design, safety equipment designed to the same due to the processing methods, such as processed products are not the same (that is, each device is tailor-made) 
上海立宏电子科技有限公司
立宏安全设备工程（上海）有限公司
lihong(shanghai)safety co.,ltd
黄经理
Tel: +86-021-58316693
Email:david@
http//www.
Add: 上海市 浦东新区 川沙镇 川六公路33号东

立宏安全提供全系列的EHS安全产品，我们集欧美安全产品一身，方便客户选择及购买，你可以直接进入立宏网站的安全产品
商城进行产品选购,立宏安全（LHS）代理了**EHS较**的安全产品，立宏网站的安全产品商城，集合了十几家安全产品企业
包括 OMRON、STI、SICK、PILZ、CASTELL、HONEYWELL、PLYMOVENT、LHS等较全面的EHS产品
主要承接设备安全系统设计，工厂设备二次改造、集设计、安装于一身的工程公司,提供环境类安全防护,将有毒有害的铣削等设
备进行空气过滤,对现场粉尘恶劣的环境进行过滤等
"